File:Screw vs Bolt.svg
File originale (file in formato SVG, dimensioni nominali 612 × 1 250 pixel, dimensione del file: 228 KB)
Questo file proviene da Wikimedia Commons. La pagina di descrizione associata è riportata qui sotto. |
Dettagli
DescrizioneScrew vs Bolt.svg |
English: [English]
A=Screw B=Bolt 1: Tool drive form 1a: Shaft driven 1b: Eccentrically driven 2: Screw head 2a: Head in the mounting material 2b: Head on the mounting material 3:Shaft with thread 3a: Shaft fully threaded 3b: Shaft partly threaded 4: Thread profile 4a: Sharp narrow thread with cutting capacity 4b: Wide thread flattened or rounded 5: Thread spacing 5a: Thread with spaces 5b: Threads against each other 6: Start 6a: Thread at a distance from the beginning 6b: Thread from the beginning 7: Point 7a: Conical sharp point 7b: Flat tip 8: Screw hole size 8a: Screw hole equal to screw shank without thread 8b: Screw hole wider than the screw 9: (Start) Washer 10: Widened premilled hole start 11:Screw hole 11a: Pre-drilled narrow screw hole depends on the material, after which the thread automatically forms its way into the material. 11b: Pre-drilled hole always pre-drilled wider than the screw width 12: (End) Washer 13: Nut with counter thread for fastening The screw drawing was originally from a file made by Wikimedia Commons user Kenfeisel, with a licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license, see this link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg The bolt drawing is orginially from a file from Pixabay, where the creator has released it explicitly under the license Creative Commons Zero, see this link on Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svgNederlands: A=Schroef B=Bout
1: Gereedschap aandrijvingsvorm 1a: Asaangedreven 1b: Excentrisch aangedreven 2: Schroefkop 2a: Kop in het bevestigingsmateriaal 2b: Kop op het bevestigingsmateriaal 3:Schacht met draad 3a: Schacht volledig bedraad 3b: Schacht deels bedraad 4: Schroefdraadprofiel 4a: Scherpe smalle schroefdraad met snijvermogen 4b: Brede schroefdraad afgevlakt of afgerond 5: Schroefdraad afstand 5a: Schroefdraad met spatie 5b: Schroefdraad tegen elkaar aan 6: Begin 6a: Schroefdraad op afstand van het begin 6b: Schroefdraad vanaf het begin 7: Punt 7a: Conische scherpe punt 7b: Vlakke punt 8: Schroefgat formaat 8a: Schroefgat gelijk aan schroefschacht zonder draad 8b: Schroefgat breder dan schroef 9: (Begin-) Ring 10: Verbrede verzinkte gat 11:Schroefgat 11a: Smalle schroefgat voorboren is materiaalafhankelijk waarna het draad zich vanzelf een weg vormt in het materiaal. 11b: Brede schroefgat altijd voorgeboord 12: (Eind-) Ring 13: Moer met tegendraad voor bevestiging De schroef afbeelding was oorspronkelijk gemaakt door Wikimedia gebruiker Kenfeisel, uitgebracht met een Creative Commons Attribution-Share Alike 3.0 Unported licensie, zie deze link link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg De bout afbdeeling is oorspronkelijk van een bestand afkomstig van Pixabay, uitgebracht met een Creative Commons Zero licensie, zie deze link op Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svg |
Data | |
Fonte | Opera propria |
Autore | Public-Publicity |
Licenza
The whole drawing is subjected as follow:
- Tu sei libero:
- di condividere – di copiare, distribuire e trasmettere quest'opera
- di modificare – di adattare l'opera
- Alle seguenti condizioni:
- attribuzione – Devi fornire i crediti appropriati, un collegamento alla licenza e indicare se sono state apportate modifiche. Puoi farlo in qualsiasi modo ragionevole, ma non in alcun modo che suggerisca che il licenziante approvi te o il tuo uso.
- condividi allo stesso modo – Se remixi, trasformi o sviluppi il materiale, devi distribuire i tuoi contributi in base alla stessa licenza o compatibile all'originale.
The Screw drawing section is originally made by Wikimedia Commons user Kenfeisel, it's source and lincense are:
- Tu sei libero:
- di condividere – di copiare, distribuire e trasmettere quest'opera
- di modificare – di adattare l'opera
- Alle seguenti condizioni:
- attribuzione – Devi fornire i crediti appropriati, un collegamento alla licenza e indicare se sono state apportate modifiche. Puoi farlo in qualsiasi modo ragionevole, ma non in alcun modo che suggerisca che il licenziante approvi te o il tuo uso.
- condividi allo stesso modo – Se remixi, trasformi o sviluppi il materiale, devi distribuire i tuoi contributi in base alla stessa licenza o compatibile all'originale.
The Bolt drawing section is originally from the user OpenClipart-Vectors at Pixabay, it's source and lincense are:
Questo file proviene da Pixabay, dove il suo creatore l'ha pubblicato esplicitamente sotto la licenza Creative Commons Zero (vedi qui).
File ID: 2024571 |
Questo file è reso disponibile nei termini della licenza Creative Commons CC0 1.0 Universal. | |
La persona che ha associato un'opera con questo atto legale ha donato tale opera nel pubblico dominio rinunciando a tutti i diritti sull'opera in tutto il mondo, inclusi tutti i diritti connessi o altri diritti simili, per quanto permesso dalla legge. Puoi copiare, modificare, distribuire ed utilizzare l'opera, anche a fini commerciali, senza chiedere alcun permesso.
http://creativecommons.org/publicdomain/zero/1.0/deed.enCC0Creative Commons Zero, Public Domain Dedicationfalsefalse |
Questo file, caricato origariamente su Pixabay, è stato verificato dall'amministratore o revisore 大诺史 il 17 agosto 2019, il quale ha confermato che il file era disponibile su Pixabay in quella data. |
Elementi ritratti in questo file
raffigura
Valore sconosciuto senza un elemento Wikidata
9 mag 2024
image/svg+xml
6c3d823ca8294ee37b1f9c7eeece59ea3b703093
233 641 byte
1 250 pixel
612 pixel
Cronologia del file
Fare clic su un gruppo data/ora per vedere il file come si presentava nel momento indicato.
Data/Ora | Miniatura | Dimensioni | Utente | Commento | |
---|---|---|---|---|---|
attuale | 11:57, 12 mag 2024 | 612 × 1 250 (228 KB) | Public-Publicity | small edit | |
10:43, 12 mag 2024 | 612 × 1 250 (229 KB) | Public-Publicity | little adjustment - gradient | ||
10:33, 12 mag 2024 | 612 × 1 250 (226 KB) | Public-Publicity | various drawing method enhancements (no significant context changes) | ||
15:26, 9 mag 2024 | 612 × 1 250 (219 KB) | Public-Publicity | Uploaded own work with UploadWizard |
Utilizzo del file
Nessuna pagina utilizza questo file.
Utilizzo globale del file
Anche i seguenti wiki usano questo file:
- Usato nelle seguenti pagine di nl.wikipedia.org:
Metadati
Questo file contiene informazioni aggiuntive, probabilmente aggiunte dalla fotocamera o dallo scanner usati per crearlo o digitalizzarlo. Se il file è stato modificato, alcuni dettagli potrebbero non corrispondere alla realtà.
Titolo breve | Screw vs Bolt |
---|---|
Larghezza | 612 |
Altezza | 1250 |